Iniciar uma nova conversa

Não Resolvido

Esta postagem tem mais de 5 anos

409

17 de julho de 2015 07:00

nao liga corretamente

EU TENHO UM Notebook empresarial Latitude 14 Série 3000 ELE LIGA MAS FICA BIPANDO SEM PARA , NAO APAREÇE NADA NA TELA , OS LEDS ACENDEN MAS FICA IMAGEM ESCURA.

245 Mensagens

17 de julho de 2015 14:00

Everton,

Quantos beeps a máquina emite? A quanto tempo isso ocorre? Que cor fica o botão de power (ligar)

Abaixo segue a tabela de beeps do sistema, favor informe qual seu equipamento encaixa:

Beep Code Overview
Beeps Description Possible Cause / Suggested Remedy
1 BIOS ROM checksum in progress or failure
System board failure, covers BIOS corruption or ROM errors.
2 No Memory (RAM) detected
  1. If you have two or more memory modules installed, remove the modules, reinstall one module, and then restart the computer. If the computer starts normally, reinstall an additional module. Continue until you have identified a faulty module or reinstalled all modules without error.
  2. If available, install good memory of the same type into your computer.
  3. If the problem persists, possible memory connector failure.
3
  • Chipset Error (North and South bridge error, DMA/IMR/Timer error)
  • Time-Of-Day Clock test failure
  • Gate A20 failure
  • Super I/O chip failure
  • Keyboard controller test failure
System board failure
4 Memory read / write failure
  1. Ensure that no special memory module/memory connector placement requirements exist.
  2. Verify that the memory modules that you are installing are compatible with your computer.
  3. If the problem persists, possible memory failure.
5 Real Time Clock (RTC) power fail
  1. Replace the battery.
  2. If the problem persists, possible battery failure or system board failure.
6 Video BIOS test failure
Video subsystem failure
7 CPU Cache test failure
Processor failure
8 LCD
LCD failure
Nenhum evento encontrado!

Top