This post is more than 5 years old
2 Intern
•
470 Posts
0
45273
March 12th, 2012 12:00
installing equalogic 1.1 mem module problems
trying to configure the newest 1.1 module on esxi5 but having some issues.
first i downloaded the vma 5.0 since 4.1 will no longer work. upon starting vma 5.0 got an error about
Cannot initialize property
'vami.DNS0.vsphere_management_assistant_(vMA', since network dvPGxxxxx has no associated pool configuration.
second
I tried downloading vcli 5.0 on another linux vm.
running ./setup.pl gives
Can't locate VMware/VIRuntime.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.8 /usr/lib/perl5/vendor_perl /usr/lib/perl5/5.8.8/i386-linux-thread-multi /usr/lib/perl5/5.8.8 .) at ./setup.pl line 17.
BEGIN failed--compilation aborted at ./setup.pl line 17.
any idea?
tdubb123
2 Intern
•
470 Posts
0
March 12th, 2012 16:00
the module is installed. but configuring it is a problem
I keep getting
Could not bind vmk4 to any of the iSCSI adapters.
tdubb123
2 Intern
•
470 Posts
0
March 12th, 2012 17:00
ok, how come I have 3 paths to the volume in vsphere?
I only have 2 nics vmk4 and 5 and on vmnic3 and 7. I did not configure a storage heartbeat ip
tdubb123
2 Intern
•
470 Posts
0
March 12th, 2012 18:00
ok a reboot fixed it
Dev Mgr
4 Operator
•
9.3K Posts
0
March 12th, 2012 22:00
Without the storage heartbeat (vmkernel), a loss of an iSCSI switch could cause a complete access loss to the volumes from what I understand.