Unsolved
This post is more than 5 years old
1 Message
0
740
FX2, FN410T and Vmware VSAN 6.2
What is the best way to setup the fn410t to connect the fc630 nics to a layer 2 access port for vsan traffic. We're going to connect the external ports to a nexus 2k/5k setup and I'm not sure how to insure that the vsan traffic only uses 2 of the external ports.
peralesa-2014
2 Posts
0
December 23rd, 2016 10:00
I guess it would depend on how many ports your FC630 nodes have. If you only have two 10Gb ports per FC630, then uplink those to your NEXUS set them for trunk and manage all of your VLANs on the vSwitch.
Create a VLAN for your VSAN traffic, and of course the other VLANs you may need for other traffic.