Unsolved
This post is more than 5 years old
3 Posts
0
9760
Disabled the beep on my inspiron 1525 vista ultimate but still it continually beeeep, beep beep like connecting and disconnecting?
After searching all over the net I found:
1. | local machine: sc stop beep && sc config beep start= disabled |
2. | remote machine: sc \remoteMachine stop beep && sc \remoteMachine config beep start= disabled |
3. | requires reboot: Device Manager -> View -> Show Hidden Devices -> Non Plug and Play -> Beep -> Disable |
4. | requires reboot: net stop beep |
5. | use TweakUI: General > Settings -> Uncheck the Beep on Errors |
BUT none work!
I've tried all those methods but none of those worked and it's driving me crazy! The beep is disabled and yet I still hear the connect / disconnect beeps all the time! Even after I have detached all USB devices, any other suggestions please?
Any knowledgeable advice would be greatly appreciated,
Thanks & Best Regards
Martin
Jim Coates
4 Operator
4 Operator
•
13.6K Posts
0
March 31st, 2010 09:00
"3. requires reboot: Device Manager -> View -> Show Hidden Devices -> Non Plug and Play -> Beep -> Disable"
This method is similar to that but has an extra step:
1. Open “Control Panel\System\Hardware Tab\Device Manager”.
2. At the top click “View\Show hidden devices” then go to “Non-Plug and Play Drivers” and double click “Beep”.
3. Now click the “Driver Tab” and finally change “Startup Type” to “Disabled”.
4. Restart.
DOSrelic
3 Posts
0
March 31st, 2010 15:00
Hi Jimco,
thanks but I was aware of that and had done it, to no affecT.:emotion-3: Your method is just another way to do #1:
Cheers & Best Regards
Martin