This post is more than 5 years old
8 Posts
0
8012
ESXi host grabs
Hello
How can I capture the logs from last 30 days? I just get 10 days of log files. Is there any way to pull out date specific logs?
How does the utility work?
Thanks
SV
This post is more than 5 years old
8 Posts
0
8012
Hello
How can I capture the logs from last 30 days? I just get 10 days of log files. Is there any way to pull out date specific logs?
How does the utility work?
Thanks
SV
Top
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
March 10th, 2017 09:00
I believe KB 457937 (support.emc.com/kb/457937) contains the instructions you are looking for. From the KB:
First request a vmsupport if one wasn't collected by the EMCgrab.
The vmsupport should have an archive of older vmkernel messages.
1. Unzip the vmsupport logs and navigate to var/run/log
A. This directory should have an archive of the vmkernel, vmwarnings.... etc.
If the customer can not get a vmsupport because the host is not responding in vCenter then the below action should be taken.
1. Connect to your ESX/ESXi host using Putty, SCP, or the like.
2. Find the messages log which logs activity from the kernel located at /var/log/
The log may be in /scratch/log/ instead of /var/log/
3. Browse to the older logs that are named messages.1, messages.2, etc . . .
Newer ESXi systems will use the name vmkernel.log and vmkernel.1.gz instead of messages
vobd.log, hostd.log and vpxa.log can also be useful so collect these at the same time.
4. Once done, transfer the files with WinSCP or Putty.
s-v
8 Posts
1
April 4th, 2017 08:00
Thank you !!