Unsolved
This post is more than 5 years old
32 Posts
0
1172
VHS size not changing after increasing number of VHS
Hello,
I have a question concerning Isilon and virtual hot spares (VHS).
After changing number of VHS in Isilon from default value (=1) to a different value available cluster capacity nor VHS capacity do change.
Virtual Hot Spare Deny Writes is enabled
Virtual Hot Spare Hide Spare is also enabled
OneFS version is 8.0.0.1
In my understanding displayed VHS capacity should increase and displayed cluster capacity should decrease or do I have a missunderstanding here?
Some screenshots (taken from simulator, but in real customer environment behavior is identical)
1) One VHS configured
2) Changed number of VHS to two.
Thanks.
Robert
BernieC
76 Posts
0
February 15th, 2017 08:00
Hello,
Have a look at KB 456700. That covers this behavior, the workaround, and the release where this is fixed.
Because the commands to be used to correct this are advanced, we ask that you open a service request so that you can be assisted.
Thanks,
Bernie