Unsolved

This post is more than 5 years old

42256

June 29th, 2011 11:00

CPUs in the Inspiron 1545

Hi, can anyone from Dell confirm or deny that the 1545 motherboard can support an intel T9800 CPU?

thanks for your help

11 Legend

 • 

47K Posts

June 29th, 2011 13:00

I would say No.

You can use many  Socket P processors with a TDP of 35W or less.

This includes the P8700, P8800, and P9700.

Intel® Core™2 Duo Processor P9700 (6M Cache, 2.80 GHz, 1066 MHz FSB)with SPEC Code(s)SLGQS

Quads and Extremes will most likely not work.

Processor core 
Penryn
Core stepping 
E0 (SLGQS)
CPUID 1067A (SLGQS)
Manufacturing process 0.045 micron

Intel® Core™2 Duo Processor T9800 (6M Cache, 2.93 GHz, 1066 MHz ...

Microarchitecture Core
Platform Montevina
MontevinaPlus
Processor core 
Penryn
Core stepping 
E0 (SLGES)
CPUID 10676 (SLGES)
Manufacturing process 0.045 micron


July 1st, 2011 08:00

Can you confirm that the original shipped heat sink is adequate for all of these CPUs?

December 6th, 2011 07:00

Can anyone confirm whether or not the supplied heat sink is adequate for a p9700 CPU?

thanks a lot!

36 Posts

December 6th, 2011 09:00

[post removed by me]

December 6th, 2011 12:00

thank you andrewpdx - I appreciate your help. How can I tell which CPU is the fastest possible supported by that motherboard? I can't find it in the Dell manual anywhere. I am thinking if a P9700 is ok then why not the T9900? While I believe the previous poster I just want to be able to see this information for myself. Thanks for your help.

36 Posts

December 6th, 2011 13:00

[post removed by me]

December 6th, 2011 13:00

I have a T3400 now.

8 Posts

April 17th, 2014 20:00

I just did it earlier this evening, swapping out a T4400 to a T9800. The new CPU actually runs cooler than the old 4400 did, and it's a lot faster. So if the OP or anyone else still needs confirmation, yes, the T9800 works well in an Inspiron 1545.

No Events found!

Top