Unsolved
This post is more than 5 years old
1 Message
0
178089
Dell Inspiron 15 3521 blue screen of death
Hi,
Over the past few weeks I've gotten the same blue screen error. It says 'Driver_IRQL_not_less_or_equal (Smb Driver Intel.sys). I've just been browsing the internet while i'm doing this.
I'm not sure what additional info is needed but i'm running the Windows 8 that the laptop came with, it's a brand new laptop (only around a month old and not refurbished) and i'm running Norton Security Suite as my antivirus. Also the last time this happened i tried updating my BIOS and obviously it didn't fix the issue.
DELL-Ravi Ch
7 Technologist
7 Technologist
•
7.1K Posts
0
April 28th, 2013 03:00
Hi MV1228,
This error is due to incompatible drivers installed for some hardware on the system. Please perform the system restore on the system to previous state when the operating system was working fine. Please follow the steps mentioned below to perform the system restore on the system
(If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click Search.) Enter Recovery in the search box, tap or click Settings, and then tap or click Recovery.
Please let me know if this helps.
Robin3
807 Posts
0
August 13th, 2013 06:00
Hi Peter,
Please provide details of the BSOD, inc Stop Error etc as per screen shot below
Details of the minidump file would be handy too.
http://forums.lenovo.com/t5/General-Discussion-Knowledge/What-is-Minidump-What-is-it-used-for/ta-p/324485
Peter Stevens
1 Message
0
August 13th, 2013 06:00
Actually, I have the same issue. But it is happening with a brand new Inspiron 15, so no way to go to a previous version.
What is the best version to use?
DELL-Ravi Ch
7 Technologist
7 Technologist
•
7.1K Posts
0
August 13th, 2013 21:00
Hi Peter Stevens,
As suggested by Paul please let us know the BSOD error so that we can assist you further.
Also, I would suggest that you run the diagnostics on the computer by following the steps mentioned below and check if there is any issue with the hardware on your system.
inspiron15r5521
5 Posts
0
August 19th, 2013 02:00
Happened to me too laptop has 2 months
This is what the crash dump contains
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000008, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff880053cb167, address which referenced memory
Debugging Details:
------------------
Page 249fbe not present in the dump file. Type ".hh dbgerr004" for details
WRITE_ADDRESS: 0000000000000000
CURRENT_IRQL: 8
FAULTING_IP:
Smb_driver_Intel+4167
fffff880`053cb167 408830 mov byte ptr [rax],sil
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: AV
PROCESS_NAME: System
TAG_NOT_DEFINED_c000000f: FFFFF88002E95FB0
TRAP_FRAME: fffff88002e8e880 -- (.trap 0xfffff88002e8e880)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=00000000ffffffe0
rdx=0000000000004040 rsi=0000000000000000 rdi=0000000000000000
rip=fffff880053cb167 rsp=fffff88002e8ea10 rbp=0000000000000000
r8=fffff880053ce190 r9=fffff8038849bb00 r10=fffffa800af3c7d0
r11=0000000000000010 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na pe nc
Smb_driver_Intel+0x4167:
fffff880`053cb167 408830 mov byte ptr [rax],sil ds:00000000`00000000=??
Resetting default scope
EXCEPTION_RECORD: fffff88002e65180 -- (.exr 0xfffff88002e65180)
ExceptionAddress: fffffa80087155c0
ExceptionCode: 00001f80
ExceptionFlags: 01000002
NumberParameters: 48696896
Parameter[0]: 0000000200000001
Parameter[1]: fffff88002e8ec90
Parameter[2]: 0000000000000000
Parameter[3]: 0000000000000000
Parameter[4]: 0000000080050033
Parameter[5]: 0000000000000000
Parameter:emotion-14:: 0000000000187000
Parameter[7]: 00000000001526f8
Parameter:emotion-29:: 0000000000000000
Parameter[9]: 0000000000000000
Parameter[10]: 0000000000000000
Parameter[11]: 0000000000000000
Parameter[12]: 00000000ffff4ff0
Parameter[13]: 0000000000000400
Parameter[14]: 007f000000000000
LAST_CONTROL_TRANSFER: from fffff80388261769 to fffff80388262440
STACK_TEXT:
fffff880`02e8e738 fffff803`88261769 : 00000000`0000000a 00000000`00000000 00000000`00000008 00000000`00000001 : nt!KeBugCheckEx
fffff880`02e8e740 fffff803`8825ffe0 : 00000000`00000001 fffffa80`0ad11b30 ffff7118`ff277600 fffff880`02e8e880 : nt!KiBugCheckDispatch+0x69
fffff880`02e8e880 fffff880`053cb167 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x260
fffff880`02e8ea10 fffff880`053c8fd2 : 0000057f`f50f31b8 fffff880`02e8eb50 fffffa80`0ad11ae0 fffff880`033d4900 : Smb_driver_Intel+0x4167
fffff880`02e8ea60 fffff880`0109d7a3 : 0000057f`f50f31b8 fffff880`033d4900 ffff5de1`3658e939 fffffa80`08779710 : Smb_driver_Intel+0x1fd2
fffff880`02e8ea90 fffff803`8825ac76 : fffff880`02e65180 fffff880`02e65180 fffff880`02e8eb50 fffffa80`08779010 : Wdf01000!FxInterrupt::_InterruptThunk+0xcf
fffff880`02e8ead0 fffff803`8828b992 : fffff880`02e65180 fffff880`02e65180 00000000`00000000 fffff880`02e70e40 : nt!KiInterruptDispatch+0x1d6
fffff880`02e8ec60 00000000`00000000 : fffff880`02e8f000 fffff880`02e89000 00000000`00000000 00000000`00000000 : nt!KiIdleLoop+0x32
STACK_COMMAND: kb
FOLLOWUP_IP:
Smb_driver_Intel+4167
fffff880`053cb167 408830 mov byte ptr [rax],sil
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: Smb_driver_Intel+4167
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: Smb_driver_Intel
IMAGE_NAME: Smb_driver_Intel.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 50d3fb27
FAILURE_BUCKET_ID: AV_Smb_driver_Intel+4167
BUCKET_ID: AV_Smb_driver_Intel+4167
Followup: MachineOwner
---------
Robin3
807 Posts
0
August 19th, 2013 10:00
@Inspiron15r5521
Re-install the Touchpad drivers
www.dell.com/.../inspiron-15r-5521
inspiron15r5521
5 Posts
0
August 27th, 2013 00:00
Re-Installed from the link you gave me
passed some days and now i got this:
Microsoft (R) Windows Debugger Version 6.2.9200.20512 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\082713-21015-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9200 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 9200.16628.amd64fre.win8_gdr.130531-1504
Machine Name:
Kernel base = 0xfffff802`5d018000 PsLoadedModuleList = 0xfffff802`5d2e4a20
Debug session time: Mon Aug 26 23:01:25.956 2013 (UTC + 2:00)
System Uptime: 0 days 4:28:47.659
Loading Kernel Symbols
...............................................................
................................................................
........................................
Loading User Symbols
Loading unloaded module list
.......................
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1000007E, {ffffffffc0000005, fffff880010d1861, fffff880009de1f8, fffff880009dda30}
*** WARNING: Unable to verify timestamp for Smb_driver_Intel.sys
*** ERROR: Module load completed but symbols could not be loaded for Smb_driver_Intel.sys
Probably caused by : Smb_driver_Intel.sys ( Smb_driver_Intel+1ef3 )
Followup: MachineOwner
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff880010d1861, The address that the exception occurred at
Arg3: fffff880009de1f8, Exception Record Address
Arg4: fffff880009dda30, Context Record Address
Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.
FAULTING_IP:
Wdf01000!FxRequest::CompleteInternal+21
fffff880`010d1861 498b9db8000000 mov rbx,qword ptr [r13+0B8h]
EXCEPTION_RECORD: fffff880009de1f8 -- (.exr 0xfffff880009de1f8)
ExceptionAddress: fffff880010d1861 (Wdf01000!FxRequest::CompleteInternal+0x0000000000000021)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 00000000000000b8
Attempt to read from address 00000000000000b8
CONTEXT: fffff880009dda30 -- (.cxr 0xfffff880009dda30)
rax=0000000000000000 rbx=fffffa80073dc020 rcx=fffffa80073dc020
rdx=00000000c0000120 rsi=0000000000000000 rdi=fffffa80090f6c40
rip=fffff880010d1861 rsp=fffff880009de430 rbp=00000000c0000120
r8=00000000c0000120 r9=fffff780000003b0 r10=fffffa8009196010
r11=0000000000000000 r12=0000057ff8c23fd8 r13=0000000000000000
r14=0000000000000000 r15=fffffa8009196010
iopl=0 nv up ei pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010246
Wdf01000!FxRequest::CompleteInternal+0x21:
fffff880`010d1861 498b9db8000000 mov rbx,qword ptr [r13+0B8h] ds:002b:00000000`000000b8=????????????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
PROCESS_NAME: System
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.
EXCEPTION_PARAMETER1: 0000000000000000
EXCEPTION_PARAMETER2: 00000000000000b8
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff8025d370168
GetUlongFromAddress: unable to read from fffff8025d3701f8
00000000000000b8 Nonpaged pool
FOLLOWUP_IP:
Smb_driver_Intel+1ef3
fffff880`0730fef3 ?? ???
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: NULL_CLASS_PTR_DEREFERENCE
LAST_CONTROL_TRANSFER: from fffff880010e4b02 to fffff880010d1861
STACK_TEXT:
fffff880`009de430 fffff880`010e4b02 : fffffa80`090b85b0 fffff880`010c63c0 fffffa80`090b85b0 fffffa80`073dc020 : Wdf01000!FxRequest::CompleteInternal+0x21
fffff880`009de4c0 fffff880`0730fef3 : fffffa80`073dc020 fffffa80`090f6ef0 00000000`00000000 0000057f`f8c23fd8 : Wdf01000!imp_WdfRequestComplete+0x176
fffff880`009de520 fffffa80`073dc020 : fffffa80`090f6ef0 00000000`00000000 0000057f`f8c23fd8 fffffa80`090c6c50 : Smb_driver_Intel+0x1ef3
fffff880`009de528 fffffa80`090f6ef0 : 00000000`00000000 0000057f`f8c23fd8 fffffa80`090c6c50 fffff880`010dfa22 : 0xfffffa80`073dc020
fffff880`009de530 00000000`00000000 : 0000057f`f8c23fd8 fffffa80`090c6c50 fffff880`010dfa22 00000000`00000000 : 0xfffffa80`090f6ef0
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: Smb_driver_Intel+1ef3
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: Smb_driver_Intel
IMAGE_NAME: Smb_driver_Intel.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 50d3fb27
STACK_COMMAND: .cxr 0xfffff880009dda30 ; kb
FAILURE_BUCKET_ID: AV_Smb_driver_Intel+1ef3
BUCKET_ID: AV_Smb_driver_Intel+1ef3
Followup: MachineOwner
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff880010d1861, The address that the exception occurred at
Arg3: fffff880009de1f8, Exception Record Address
Arg4: fffff880009dda30, Context Record Address
Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.
FAULTING_IP:
Wdf01000!FxRequest::CompleteInternal+21
fffff880`010d1861 498b9db8000000 mov rbx,qword ptr [r13+0B8h]
EXCEPTION_RECORD: fffff880009de1f8 -- (.exr 0xfffff880009de1f8)
ExceptionAddress: fffff880010d1861 (Wdf01000!FxRequest::CompleteInternal+0x0000000000000021)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 00000000000000b8
Attempt to read from address 00000000000000b8
CONTEXT: fffff880009dda30 -- (.cxr 0xfffff880009dda30)
rax=0000000000000000 rbx=fffffa80073dc020 rcx=fffffa80073dc020
rdx=00000000c0000120 rsi=0000000000000000 rdi=fffffa80090f6c40
rip=fffff880010d1861 rsp=fffff880009de430 rbp=00000000c0000120
r8=00000000c0000120 r9=fffff780000003b0 r10=fffffa8009196010
r11=0000000000000000 r12=0000057ff8c23fd8 r13=0000000000000000
r14=0000000000000000 r15=fffffa8009196010
iopl=0 nv up ei pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010246
Wdf01000!FxRequest::CompleteInternal+0x21:
fffff880`010d1861 498b9db8000000 mov rbx,qword ptr [r13+0B8h] ds:002b:00000000`000000b8=????????????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
PROCESS_NAME: System
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.
EXCEPTION_PARAMETER1: 0000000000000000
EXCEPTION_PARAMETER2: 00000000000000b8
READ_ADDRESS: 00000000000000b8 Nonpaged pool
FOLLOWUP_IP:
Smb_driver_Intel+1ef3
fffff880`0730fef3 ?? ???
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: NULL_CLASS_PTR_DEREFERENCE
LAST_CONTROL_TRANSFER: from fffff880010e4b02 to fffff880010d1861
STACK_TEXT:
fffff880`009de430 fffff880`010e4b02 : fffffa80`090b85b0 fffff880`010c63c0 fffffa80`090b85b0 fffffa80`073dc020 : Wdf01000!FxRequest::CompleteInternal+0x21
fffff880`009de4c0 fffff880`0730fef3 : fffffa80`073dc020 fffffa80`090f6ef0 00000000`00000000 0000057f`f8c23fd8 : Wdf01000!imp_WdfRequestComplete+0x176
fffff880`009de520 fffffa80`073dc020 : fffffa80`090f6ef0 00000000`00000000 0000057f`f8c23fd8 fffffa80`090c6c50 : Smb_driver_Intel+0x1ef3
fffff880`009de528 fffffa80`090f6ef0 : 00000000`00000000 0000057f`f8c23fd8 fffffa80`090c6c50 fffff880`010dfa22 : 0xfffffa80`073dc020
fffff880`009de530 00000000`00000000 : 0000057f`f8c23fd8 fffffa80`090c6c50 fffff880`010dfa22 00000000`00000000 : 0xfffffa80`090f6ef0
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: Smb_driver_Intel+1ef3
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: Smb_driver_Intel
IMAGE_NAME: Smb_driver_Intel.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 50d3fb27
STACK_COMMAND: .cxr 0xfffff880009dda30 ; kb
FAILURE_BUCKET_ID: AV_Smb_driver_Intel+1ef3
BUCKET_ID: AV_Smb_driver_Intel+1ef3
Followup: MachineOwner
---------
2: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff880010d1861, The address that the exception occurred at
Arg3: fffff880009de1f8, Exception Record Address
Arg4: fffff880009dda30, Context Record Address
Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.
FAULTING_IP:
Wdf01000!FxRequest::CompleteInternal+21
fffff880`010d1861 498b9db8000000 mov rbx,qword ptr [r13+0B8h]
EXCEPTION_RECORD: fffff880009de1f8 -- (.exr 0xfffff880009de1f8)
ExceptionAddress: fffff880010d1861 (Wdf01000!FxRequest::CompleteInternal+0x0000000000000021)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 00000000000000b8
Attempt to read from address 00000000000000b8
CONTEXT: fffff880009dda30 -- (.cxr 0xfffff880009dda30)
rax=0000000000000000 rbx=fffffa80073dc020 rcx=fffffa80073dc020
rdx=00000000c0000120 rsi=0000000000000000 rdi=fffffa80090f6c40
rip=fffff880010d1861 rsp=fffff880009de430 rbp=00000000c0000120
r8=00000000c0000120 r9=fffff780000003b0 r10=fffffa8009196010
r11=0000000000000000 r12=0000057ff8c23fd8 r13=0000000000000000
r14=0000000000000000 r15=fffffa8009196010
iopl=0 nv up ei pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010246
Wdf01000!FxRequest::CompleteInternal+0x21:
fffff880`010d1861 498b9db8000000 mov rbx,qword ptr [r13+0B8h] ds:002b:00000000`000000b8=????????????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
PROCESS_NAME: System
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - L'istruzione a 0x%08lx ha fatto riferimento alla memoria a 0x%08lx. La memoria non poteva essere %s.
EXCEPTION_PARAMETER1: 0000000000000000
EXCEPTION_PARAMETER2: 00000000000000b8
READ_ADDRESS: 00000000000000b8 Nonpaged pool
FOLLOWUP_IP:
Smb_driver_Intel+1ef3
fffff880`0730fef3 ?? ???
BUGCHECK_STR: AV
DEFAULT_BUCKET_ID: NULL_CLASS_PTR_DEREFERENCE
LAST_CONTROL_TRANSFER: from fffff880010e4b02 to fffff880010d1861
STACK_TEXT:
fffff880`009de430 fffff880`010e4b02 : fffffa80`090b85b0 fffff880`010c63c0 fffffa80`090b85b0 fffffa80`073dc020 : Wdf01000!FxRequest::CompleteInternal+0x21
fffff880`009de4c0 fffff880`0730fef3 : fffffa80`073dc020 fffffa80`090f6ef0 00000000`00000000 0000057f`f8c23fd8 : Wdf01000!imp_WdfRequestComplete+0x176
fffff880`009de520 fffffa80`073dc020 : fffffa80`090f6ef0 00000000`00000000 0000057f`f8c23fd8 fffffa80`090c6c50 : Smb_driver_Intel+0x1ef3
fffff880`009de528 fffffa80`090f6ef0 : 00000000`00000000 0000057f`f8c23fd8 fffffa80`090c6c50 fffff880`010dfa22 : 0xfffffa80`073dc020
fffff880`009de530 00000000`00000000 : 0000057f`f8c23fd8 fffffa80`090c6c50 fffff880`010dfa22 00000000`00000000 : 0xfffffa80`090f6ef0
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: Smb_driver_Intel+1ef3
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: Smb_driver_Intel
IMAGE_NAME: Smb_driver_Intel.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 50d3fb27
STACK_COMMAND: .cxr 0xfffff880009dda30 ; kb
FAILURE_BUCKET_ID: AV_Smb_driver_Intel+1ef3
BUCKET_ID: AV_Smb_driver_Intel+1ef3
Followup: MachineOwner
---------
Robin3
807 Posts
0
August 28th, 2013 10:00
Looks like the touch pad drivers are causing a conflict again.
Try the Synaptics driver
http://www.synaptics.com/resources/drivers/
Alternatively, it could well be another driver conflicting with the touch pad driver, in which case you will need to ensure all your other hardware drivers are up to date.