How can I setup USB 3.0 On Dell n5110?

Hi,

Welcome to the Community.

Inspiron N5110 has one USB 2.0 port that's on the left side and two USB 3.0 port (one on the right and other on the rear side).

Are the USB 3.0 ports not working and only the USB 2.0 port is working?

You can find the updated driver for  USB 3.0 in the link below:

www.dell.com/.../DriverFileFormats

Hope this helps,

Thank You

Roshan

thank you very much for your reply

but the problem is still found

is there any special technique when i setup chipst driver ?

is there any special technique when i setup chipst driver TO DETECT THIS PORT AS USB 3.0?

Hi engmmd,

Did you try installing the driver for USB 3.0 from the link on my previous post? There is no special technique to install chipset driver,however after installing the windows,when you start installing the drivers you need to follow a order in which the drivers are installed.

Refer to the link below installing drivers in correct order:

support.dell.com/.../document

Thank You

Roshan.

The Vostro 1015 has USB 2.0 only - there are no USB 3.0 ports in the system.

No. I have a N5110. There are 2 USB 3.0.

Hello
I have the same problem. I bought a new laptop. 
I did all the updates. this address ( http://www.dell.com/support/drivers/us/en/19 ) .
now is not working usb 3.0, but usb 2.0 is working. All was working before updating. Help please?

please very urgent

Then why did your link refer to the Vostro 1015?

This is the USB 3.0 driver

www.dell.com/.../DriverFileFormats

BEFORE you install it, these two MUST BE installed first:

www.dell.com/.../DriverFileFormats

and

www.dell.com/.../DriverFileFormats