Unsolved
This post is more than 5 years old
1 Rookie
•
14 Posts
0
8053
June 28th, 2006 14:00
Latitude D600 speed
Hi i have that notebook but the speed dosen't seem to be 1500mhz i have tried a cpu identification util and it show me that the processor speed it's 600mhz.
Anyone know at the bios if it must be on a special option to work fast?.
Here is more information:
Number of CPUs 1
Name Intel Pentium M 715
Code name Dothan
Specification Intel(R) Pentium(R) M processor 1.50GHz
Family/Model/Stepping 6D6
Extended Family/Model 0/0
Brand ID 22
Package mPGA-479M (5h)
Core Stepping B1
Technology 90nm
Instructions Sets MMX, SSE, SSE2
Features
Clock Speed 599.4 MHz <----------- this is correct?
Clock multiplier x6.0
Front Side Bus Frequency 99.9 MHz
Bus Speed 399.6 MHz
Stock frequency 1500 MHz
L1 Data Cache 32 KBytes, 8-way set associative, 64 Bytes line size
L1 Instruction Cache 32 KBytes, 8-way set associative, 64 Bytes line size
L2 Cache 2048 KBytes, 8-way set associative, 64 Bytes line size
L2 Latency 5
L2 Speed 599.4 MHz (Full)
L2 Location On Chip
L2 ECC Check enabled
L2 Data Prefetch Logic yes
L2 Bus Width 256 bits
Name Intel Pentium M 715
Code name Dothan
Specification Intel(R) Pentium(R) M processor 1.50GHz
Family/Model/Stepping 6D6
Extended Family/Model 0/0
Brand ID 22
Package mPGA-479M (5h)
Core Stepping B1
Technology 90nm
Instructions Sets MMX, SSE, SSE2
Features
Clock Speed 599.4 MHz <----------- this is correct?
Clock multiplier x6.0
Front Side Bus Frequency 99.9 MHz
Bus Speed 399.6 MHz
Stock frequency 1500 MHz
L1 Data Cache 32 KBytes, 8-way set associative, 64 Bytes line size
L1 Instruction Cache 32 KBytes, 8-way set associative, 64 Bytes line size
L2 Cache 2048 KBytes, 8-way set associative, 64 Bytes line size
L2 Latency 5
L2 Speed 599.4 MHz (Full)
L2 Location On Chip
L2 ECC Check enabled
L2 Data Prefetch Logic yes
L2 Bus Width 256 bits
Message Edited by josegalvez on 06-29-200604:33 PM
No Events found!
C840 Master
101 Posts
0
July 9th, 2006 21:00
man_child
6 Posts
0
July 15th, 2006 00:00
Hi josegalvez !
Your computer is running normal, 600mhz in normal for non intense usage. Your notebook (D600) 1.5ghz Dothan chip uses Enhanced Speed Step Technology! It does that to use less power and less heat during normal usage. If you want your notebook to run at 1.5, or just to by pass "Speed Step". You will have to open up your "Power Option Properties", and select "Always On". That will run your notebook at 1.5ghz all the time, but it will also produce more heat and use more power. I use to want my notebook to run always at 1.7, but find it's better to let Speed Step do it's job. :P You might want to download a temp control program for your cpu (Fan control), since it will get hotter than usual.
Hope this helps? Chow!