Unsolved
This post is more than 5 years old
4 Posts
0
15139
June 24th, 2014 02:00
M6800 stuck at Dell logo
Hello,
after installing W7_64(not sure if it's connected with OS) i'm facing the next issue - on reboot or power up computer just hangs up on dell logo.
SSDs tested - Samsung 840 pro 256 and 512gb (latest firmware), SK hynix 256gb (comes with laptop).
Secondary HDD installed - 1.5Tb Hitachi 5k1500
I was trying to boot only with SSD in main and secondary HDD compartment. with no results.
Attempt to enter the BIOS on One-Time boot menu cause Dell logo with blue bar and yellow message Preparing to enter Setup\One time...
Only thingss helps - remove all SSDs\HDDs and than i'm able to get into BIOS.
plus to all that - mSata Plextor 256M5M not detected in BIOS.
PS all this SSDs, HDD and msata works perfectly on my M4600
to4ko
4 Posts
0
June 25th, 2014 10:00
Update - looks like the issue was in W7 installation.
After 3 attempts system working fine for 2 days.
But still, Plextor mSata 256M5M (firmware 1.04. Will try to update firmware and update the post.
to4ko
4 Posts
0
June 26th, 2014 03:00
So, Plextor firmware updated with no result - M6800 stucks at Dell logo with no possibility to login to BIOS or One time boot menu.
Any ideas?