Unsolved
This post is more than 5 years old
17 Posts
0
1337
m7510 primary SSD RAID to AHCI
Hello!
I have rather fresh m7510 with two SSD's. Primary, where OS was installed is on the factory, came with the system, another 850 EVO was added later. I have installed Samsung Magician to look at my drives. It does recognize the latter, but tell it does not perform optimum because AHCI mode is disabled in BIOS. Yes, I have tried change to 0 the Start value for msahci, iastorv, atapi, no luck.
So question #1, what is right way to get AHCI in this system. OS is Windows 7 64-bit.
The second question is that most of software recognized that primary drive as
MP59 1VNeMS MAUSGN2 65BG
while Intel RST tells it is
PM951 NVMe SAMSUNG 256GB
So I am curious about those character scrambling and interested, how to get it under Samsung Magician control.
Thanks in advance
ejn63
9 Legend
9 Legend
•
87.5K Posts
0
August 14th, 2016 19:00
Samsung Magician works only with retail Samsung drives - it won't work with the OEM 951 drive.
You don't want AHCI for an NVMe drive - the drive runs in native PCIe mode, not AHCI.
rrlagic
17 Posts
0
August 14th, 2016 20:00
Thanks for the suggestion. Suppose, there is no need for AHCI for NVMe drive. But I have another one, which I definitely want to run in AHCI. No luck in this case?
ejn63
9 Legend
9 Legend
•
87.5K Posts
0
August 15th, 2016 06:00
I can't be definitive, but I doubt there's a way to run both NVMe and AHCI in the same system.