Unsolved
This post is more than 5 years old
2 Posts
0
1395
January 27th, 2020 03:00
Latitude 5401 multiple screens using WD19
Hi
I'm trying to run 3 screens from my Latitude 5401 connected to a WD19 port. I can get 2 screens to work using either 2 DP's or DP and HDMI after a lot of fiddling and screens flickering. When I try 3 screens then I get 2 flickering.
I've got all the latest updates and patches installed. Monitors factory reset and still no joy.
I've seen that there seems to be a lot of issues with this dock. If anyone has any other ideas they would be much appreciated!
Thanks.
No Events found!
gleva86
1 Rookie
•
15 Posts
0
January 27th, 2020 07:00
Do not use the HDMI port ... that's the reason of the flickering.
I have the same problem with my Dell D6000 docking.
2 external screens: 1 on DP and 1 on HDMI. HDMI = flickering.
Changed to 2x DP = no flickering.
DELL-Cares
Moderator
•
27.8K Posts
•
553 Points
0
January 27th, 2020 21:00
We tried reaching you on a private message but did not receive a response. Please feel free to write back whenever you are available.