This post is more than 5 years old

Closed

2 Posts

40563

February 19th, 2011 09:00

Flashing Power Light - No Response

Monitor Model =   2007 FP.   The power light and the light in the "Back" button flash every 2 seconds,  and there's no response to any of the function buttons on the unit,  including the ON-OFF (i.e. Power) button.    There is no display,  ju7st a black screen ....  problem developed after unit was in "sleep" mode for approx.  2 hours.   Tried the monitor on a different computer .... same problem.   Any suggestions?    Thanks,   Leslie

Community Manager

 • 

56.9K Posts

 • 

232.1K Points

February 22nd, 2011 18:00

That is the fail/safe test. It is defective.

2 Posts

February 21st, 2011 07:00

Chris ....   thanks very much.   Tried that before posting  ....  I think that's your "self test" protocol.   In my case,  nothing appears on the screen,  and the lights continue flashing at 2-second (approx.) intervals.   I'm thinkin' the monitor is "toast",   but hesitant to toss it because in all my years of computing,  I've never had a monitor fail.  Any suggestions would be great.

Thanks,  Leslie

Community Manager

 • 

56.9K Posts

 • 

232.1K Points

February 21st, 2011 07:00

qdiman,

* Power off the monitor
* Disconnect the power cord from the rear of the monitor
* Disconnect all monitor cords from the PC (USB, DVI, VGA, DisplayPort, HDMI, etc.)
* Press and hold the monitor power button down for 5 seconds
* Reconnect the power cord to the rear of the monitor
* Power on the monitor. What appears?

No Events found!

Top