VESA compatible monitor? E152FPb flat panel mount

cerealman,

Thank you for using the Dell Community Forum.

Detaching Monitor From Stand: Dell E152FP

---

This monitor is VESA compliant for wall mounting, and detaching the monitor from the stand is necessary.

Steps for removing the monitor from the stand:

1. Turn power off to monitor and computer. Remove Cable Cover and disconnect all cables. Remove the computer from the stand.

2. Push the monitor to lowest position of the height adjustment and install shipping lock. The shipping lock will hold the monitor in the lowest position.
3. Lay the monitor face down on a padded surface. The padded surface prevents scratches to the front surface of the monitor.

4. Remove the screw cover. Grasp and pull around the edges. No tools are required.

5. The VESA screws are accessible through the four large holes in the stand. Remove the screws using a #2 Philips screwdriver and retain for future use.

6. Pick up the bottom of the stand. There are two metal tabs at the top of the VESA plate that insert into the monitor. Pull the stand away from the monitor, being careful not to scratch the monitor with the stand.

7. To reinstall the monitor to the stand, tilt the VESA plate forward and insert the metal tabs on the stand into the openings in the VESA recess of the monitor. Install the four VESA screws and attach the screw cover.