Unsolved
This post is more than 5 years old
12 Posts
0
1309
Backup sap
Hello,
when I do a backup for sap, if I have a problem saving a file that the backup recovery. how to change the parameter to avoid it
* VMSAPPR01:backint:P01 1 retry attempted
* VMSAPPR01:backint:P01 brbackup exited with error status 2.
* VMSAPPR01:backint:P01
* VMSAPPR01:backint:P01 (pid = 5980) (date = 04.10.2012 05:20:11) Backup Failed.
* VMSAPPR01:backint:P01 80767:nsrsapsv: Refer to BRBACKUP's F log for details.
* VMSAPPR01:backint:P01 80767:nsrsapsv: Refer to BRBACKUP's F log for details.
* VMSAPPR01:backint:P01 (pid = 5980) (date = 04.10.2012 05:20:15) A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.
ble1
2 Intern
2 Intern
•
14.3K Posts
0
October 4th, 2012 11:00
You would need to check on client backint log (in /nsr/applogs) and brbackup log (in /oracle/P01/sapbackup). Yje message you bolded seems to indicated that client is not able to communicate back to server/storage node. If this is multihomed environment, make sure proper interface is used and that it can communicate back. But still, check client side logs and if possible run manually brbackup to see if that works.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
October 9th, 2013 02:00
I had the same issue ……. solved by adding util_path= in the BRTools configuration file init .sap (with BRTools 7.10 or greater)
You can find the backint directory by using the following command:
find / -name backint* -print
DBSID is the Data base name