Unsolved
This post is more than 5 years old
1 Message
0
776
June 24th, 2014 21:00
How to restore single file from archive backup
Hi all
we are using Networker 8.0.2, how to restore single file from old archive tape backup by non indexed method.
Regards
R.Mohanakannan
No Events found!
ble1
4 Operator
•
14.3K Posts
1
June 25th, 2014 05:00
You can do ssid restore, but you need to know exact path and it is case sensitive (otherwise restore whole ssid to temp location).
Jeffey1
4 Operator
•
2.8K Posts
0
October 21st, 2014 02:00
Hi Mohanakannan,
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and questions can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "Networker Support Forum" which would be the most relevant for this question.
crazyrov
4 Operator
•
1.3K Posts
0
October 27th, 2014 12:00
Mohana,
If you have a free drive and enough time you could scan the tape with the following command and build the index files for the respective saveset.
Load the tape : nsrjb -nlv -f drive_name -T barcode_of_tape
start the scanner command : scanner -i -S ssid drive_name
bingo.1
2.4K Posts
0
October 27th, 2014 13:00
If you know the EXACT pathname you an also recover a single file/subset as follows:
recover -S -a