Unsolved
This post is more than 5 years old
10 Posts
0
2488
July 1st, 2016 03:00
Incorrect timezone offset, Jobs starting 1 hours early
Set up:
Windows Server 2008 R2
EMC Networker 8.2.1
I have an issue where by the time within NMC is 1 hour ahead of the Server is runs on.
Server Time zone is set as UTC Dublin, Edinburgh, Lisbon, London but when i run the nsradmin command show timezone offset is shows at GMT +0100.
Any ideas how to amend this so itsr GMT +0000. I have read through identicle issues on this forum but none came back with a resolution.
Thanks in Advance.
No Events found!
gautamgp
226 Posts
0
July 4th, 2016 00:00
Looks like a bug to me, please open a Support Request.
seb_bup
10 Posts
1
July 7th, 2016 01:00
I have been in touch with EMC support and they have confirmed this is a known issue. In my situation the workaround did not help either.
Issue
NMC displays wrong time.
Known issue (NW161097).
Cause
Known issue (NW161097).
Change
Daylight Saving Time (DST) changed.
Resolution
Workaround - Restart Networker server daemons (not just GST).
Currently NW161097 is ongoing
clebeuva
1 Rookie
•
58 Posts
0
July 7th, 2016 01:00
I have the same issue and I have just updated to 8.2.3.3.
seb_bup
10 Posts
1
July 11th, 2016 05:00
So i get in this morning and as per my routine i check the weekends jobs. Took me a while but for some unknown reason the time in NMC now matches the server.
clebeuva
1 Rookie
•
58 Posts
0
July 12th, 2016 01:00
I've just checked and the NMC seems to be at the correct time on my workstation too.
ble1
6 Operator
•
14.4K Posts
•
56.2K Points
0
July 27th, 2016 04:00
Last time I have seen this was after DST change. It lasts until server and NMC are not restarted (sometimes only server is enough).