Unsolved
This post is more than 5 years old
4 Posts
0
4856
February 11th, 2011 04:00
Networker 7.6 SP1 NDMP fails
We've got the following constellation:
Celarra NS480(NDMP Filer)-------Networker--------Data Domain 670
The backuparea in the celerra is realized via a Virtual Datamover.
When we start the backup the following error ocurrs:
Networkerside:
3:nsrdsa_save: Unable to determine parent jobid, continuing
6900:nsrdsa_save: Update of job cmd line attribute failed.
39078:nsrdsa_save: JOBS error: Please pass a valid jobid
42658:nsrdsa_save: DSA savetime = 1297338549
NDMP Service Debug: The process id for NDMP service is 0x33928010
42909:nsrndmp_save: Performing DAR Backup..
Host = xxx.xxx.xxx (xxx.xxx.xxx.xxx) port = 9376
42597:nsrndmp_save: data connect: failed to establish connection
42886:nsrndmp_save: Unable to start the NDMP backup process.
nsrdsa_save : Aborted
42913:nsrndmp_save: Save session closed with NW server successfully
Celerraside:
2011-02-11 13:05:30: NDMP: 3: Session 441 (thread ndmp441) NdmpdMover::connect: connect error: Connection refused
2011-02-11 13:05:30: NDMP: 3: Session 441 (thread ndmp441) Invalid state to stop mover (0).
2011-02-11 13:05:45: NDMP: 3: Session 443 (thread ndmp443) NdmpdMover::connect: connect error: Connection refused
2011-02-11 13:05:45: NDMP: 3: Session 443 (thread ndmp443) Invalid state to stop mover (0).
Thanks in advance
wiertelarz_t
4 Posts
0
February 14th, 2011 02:00
Hello David,
it had never worked so far. The parameters we've used are nsrndmp_save -T dump -M
Applicationinformation:
DSA=y
UPDATE=y
HIST=y
During the Abortion the Networker writes an Indexfile of 1 kb.
I'm greatful for any ideas.
David_Hampson_90e289
2 Intern
•
243 Posts
0
February 14th, 2011 02:00
Has this ever worked before? What parameters have you set?
sweller1
78 Posts
1
February 15th, 2011 08:00
The latest 7.6.1.3 Cumulative hotfix has quite a few NDMP fixes in it including:
NW123608: NDMP DSA backups do not run successfully when the -P parameter is specified
NW117744: nsrdsa_save core dump randomly on Solaris
I would recommend unpgrading to this and rerunning. You can find it on the NetWorker Support webpage on Powerlink:
https://support.emc.com/products/NetWorker
Hope this is helpful. Please do post and let us know.
Cheers,
Steve
wiertelarz_t
4 Posts
0
February 16th, 2011 08:00
Hello Steven,
thanks for your quick advice. Unfortunately the hotfix did not solve the problem. The error that occurs is still the same as before.
Meanwhile, I opened a support ticket at EMC.
When i'll get a solution i'll post it right here.
Best Regards,
Thomas