Unsolved
This post is more than 5 years old
17 Posts
0
630
November 29th, 2007 00:00
Two tape drive have same symbolic name
Folks,
I have 2 IBM LTO-3 tape drive assigned to a storage node server. I can see 2 tape drives are listed in Device Manager and both symbolic name are shown as Tape0 which is not right.
Hence, when i do inquire, both drives listed as "Tape" instead of \\.\Tape0 and \\.\Tape1. What could possibly cause this behaviour? Any tips appreciated. Thank you.
These are system information:-
1.Networker 7.4
2.HBA LPe1150-E
3.Windows 2003 SP2(storage node), Windows 2003- no service packs (Networker
Server)
4. Quantum Scalar I2K with LTO 3 tape drives.
I have 2 IBM LTO-3 tape drive assigned to a storage node server. I can see 2 tape drives are listed in Device Manager and both symbolic name are shown as Tape0 which is not right.
Hence, when i do inquire, both drives listed as "Tape" instead of \\.\Tape0 and \\.\Tape1. What could possibly cause this behaviour? Any tips appreciated. Thank you.
These are system information:-
1.Networker 7.4
2.HBA LPe1150-E
3.Windows 2003 SP2(storage node), Windows 2003- no service packs (Networker
Server)
4. Quantum Scalar I2K with LTO 3 tape drives.
No Events found!
HabibG2
455 Posts
0
November 29th, 2007 02:00
Disable one of the NICs if you can.
amediratta
2 Intern
•
2K Posts
0
November 29th, 2007 02:00
HabibG2
455 Posts
0
November 29th, 2007 03:00