Unsolved
This post is more than 5 years old
12 Posts
0
11065
February 13th, 2009 11:00
2nd PowerConnect 6248 in stack is slow
We have a situation where we recently purchased a 2nd PowerConnect 6248 and stacked it with a pre-existing 6248 (~1 yr older), but all of the machines and servers plugged into the older switch have extremely slow throughput (approx 10x slower than on the other, newer switch).
We upgraded both switches to the latest firmware (2.2.0.3, A14) and have dual stacking connections via the 48Gbps stacking modules (Dell part#: 320-5171).
Any help and/or suggestions would be appreciated. Thx!
_Khalid
No Events found!
kjhosein
12 Posts
0
February 13th, 2009 12:00
Dear moderator - My apologies, but I mistakenly posted this thread here. I should have posted it to the PowerConnect forum (and just did). New thread:
http://en.community.dell.com/forums/t/19258106.aspx
You may delete.
Thanks!
bh1633
909 Posts
0
February 13th, 2009 12:00
Please post your config file, your log file and the output of "show process cpu". Also, please five more detail on your network.