ACL on N3024 with IP routing enabled

Question

Hello, We have a client which wants to restrict traffic from one VLAN to one destination subnet. We have configured the IP ACL as following. ip access-list VL1002-INpermit ip 192.168.102.0 255.255.255.0 172.31.254.0 255.255.255.0! interface vlan 1002ip address 192.168.102.1 255.255.255.0ip access-group VL1002-IN in The problem is that when that ACL is applied, the setup cannot work. We cannot even ping the internal 102. devices from the switch. I have done various testing from permitting subnet 192.168.102.x to itself in the ACL, to a reverse 'OUT' ACL, but nothing seems to work. I am using version 6.1.0.6 on a stack of N3024. Any tips? Cheers.

nicolaidesnikos · Answer

Hello, I have updated the firmware to the latest code and it seems to have resolved the issue. ACLs now work as they should.

Networking General

Was this post helpful?