Unsolved
This post is more than 5 years old
2 Posts
0
7696
July 25th, 2005 19:00
Better Question for PowerConnect 3324
Ok, so here it is:
here is what I am trying to do.
We have a t1 line coming into our building and several small offices on our floor would like to have internet through us. So, we bought this powerconnect 3324 and figured each office can have one port we'll run one cable to each office and we'll VLAN each port. However, because one of the ports on the swith is going to be used to plug in the internet cable, I have no idea what seetings i should on the vlans so they accept the internet but deny communication within each other. Can this be done? I am unable to find where in the manual I can condifure it like this so any heplwould be deeply appreciated. I figure this would be a great question to answer since this is a very real-world possible application for this switch.
here is what I am trying to do.
We have a t1 line coming into our building and several small offices on our floor would like to have internet through us. So, we bought this powerconnect 3324 and figured each office can have one port we'll run one cable to each office and we'll VLAN each port. However, because one of the ports on the swith is going to be used to plug in the internet cable, I have no idea what seetings i should on the vlans so they accept the internet but deny communication within each other. Can this be done? I am unable to find where in the manual I can condifure it like this so any heplwould be deeply appreciated. I figure this would be a great question to answer since this is a very real-world possible application for this switch.
0 events found
No Events found!
DELL-Cuong N.
1K Posts
0
July 26th, 2005 17:00
Here is a whitepaper on VLAN which might help you with your network configuration.
http://www.dell.com/downloads/global/products/pwcnt/en/app_note_8.pdf
Cuong.
CliffF
40 Posts
0
July 28th, 2005 15:00