Unsolved
This post is more than 5 years old
4 Posts
0
731
February 26th, 2019 02:00
Configuring trunk between PC 6248 & Dell EMC S4128F-ON
Hello Everyone.
I require some guidance here and some help for configuring a trunk between my current Powerconnect 6248 and new Dell EMC S4128F-ON. I am planning to use the already present SFP ports on both the switches. There are a few things that i would like to clarify:
1. The cable to be used - Which sfp cable should i be using? It would help if someone clarify this.
2. Would the same sfp cable work for both ends of both the switches?
Any feedback would be helpful.
Thanks.
No Events found!
aghashahan
4 Posts
0
February 26th, 2019 03:00
Some more questions:
1. Which transceivers should i be using? As i understand they should be same at both the end and should be compatibles to each other as well.
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.5K Points
0
February 26th, 2019 09:00
Hi,
Are you going to use 1G SFP or 10G SFP+?