Enable SNMP for S5000 Switches

Hi,

After you run snmp-server community "public" ro 192.168.10.19

Did you get the message %SNMP-6-SNMP_WARM_START: Agent Initialized - SNMP WARM_START.

https://www.force10networks.com/CSPortal20/KnowledgeBase/DOCUMENTATION/CLIConfig/FTOS/S5000_Config_9.6.0.0_Sept_23_2014.pdf

Page 851

If you run show snmp does it show data being passed?

Page 1842 https://www.force10networks.com/CSPortal20/KnowledgeBase/DOCUMENTATION/CLIConfig/FTOS/S5000_9.6.0.0_CLI_Sept_23_2014.pdf

What does the output of

show snmp group

return?

Hi Josh,

please find below the output.

S5000(1)#show snmp

     20078 SNMP packets input

         0 Bad SNMP version errors

         0 Unknown community name

         0 Illegal operation for community name supplied

         0 Encoding errors

    320396 Number of requested variables

         0 Number of altered variables

     19375 Get-request PDUs

       675 Get-next PDUs

         0 Set-request PDUs

     20072 SNMP packets output

         0 Too big errors (Maximum packet size 1500)

       449 No such name errors

         0 Bad values errors

         0 General errors

     20054 Response PDUs

        18 Trap PDUs

S5000(1)#show snmp group

groupname: v1v2creadg                        security model: v1

readview : v1v2cdefault                      writeview: no write view specified

notifyview: v1v2cdefault                     context: no context specified

row status: active

groupname: v1v2creadg                        security model: v2c

readview : v1v2cdefault                      writeview: no write view specified

notifyview: v1v2cdefault                     context: no context specified

row status: active

groupname: v1v2cwriteg                       security model: v1

readview : v1v2cdefault                      writeview: v1v2cdefault

notifyview: v1v2cdefault                     context: no context specified

row status: active

groupname: v1v2cwriteg                       security model: v2c

readview : v1v2cdefault                      writeview: v1v2cdefault

notifyview: v1v2cdefault                     context: no context specified

row status: active

I managed to sent the snmp credentials and the test shows successfully passed, but i'm not able to get the Alarms or Utilization, or Fan Status in the OPManager Dashboard.

Appreciate if you can help me on this.. I do have other switches which I recently purchased, 2024P, 2048P, S4810 as Core and S5000 Server Farm Switches.

Thanks,

It looks like it is making connection with the software and is sending and receiving PDUs, so it is probably not a switch configuration issue. Have you installed the Force10 MIBs in the software? http://www.force10networks.com/CSPortal20/KnowledgeBase/Documentation.aspx

Hi Josh,

Yes, I have installed the MIBs and I've added some of the monitors such as CPU,Memory and other MIBs to the OPManager Dell-5000 Switch Template which I have created it before and the S5000 switch is part of this template.

OPManager support useless and the only answer they have is to follow KB article which doesn't lead to anywhere.

Any help to get the S5000 works with OPManager?