This post is more than 5 years old
1 Rookie
•
32 Posts
0
16101
January 23rd, 2015 14:00
Enable SSLv3 and TLS on PowerConnect 5448?
Is there any way to enable TLS and SSLv3 on PC5448? I have the latest firmware installed, 20046, but don't see any option to enable it.
Thanks in advance.
No Events found!
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.2K Points
0
January 23rd, 2015 17:00
The manual was not updated after we added support for V3 and the command didn’t exist at that time.
switch(config)# ssl version
v2&v3 SSLv2 and SSLv3 will be supported.
v3 Only versions starting with SSLv3 will be supported.
switch(config)# ssl version
amunter
1 Rookie
•
32 Posts
0
January 23rd, 2015 16:00
Ok. I do have updated firmware running. 2.0.0.46 is the version. Do you have a pointer for documentation of the ssl version command? I cant find reference to it in the 5448 manual I am able to pull down from the dell downloads site.
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.2K Points
0
January 23rd, 2015 16:00
Hi,
The feature was added in version 2.0.0.42, so you may need to update your firmware. http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=777T5&fileId=2731103560&osCode=NAA&productCode=powerconnect-5424&languageCode=EN&categoryId=NI
Then using the ssl version command should let you choose v3 only.
amunter
1 Rookie
•
32 Posts
0
January 23rd, 2015 17:00
Awesome. Worked. Thanks!