This post is more than 5 years old
12 Posts
0
101358
January 8th, 2016 01:00
IGMP snooping on a stack
Hello,
I have 2 N4032F in a stack.
The switches are for a VSAN cluster.
I want to enable IGMP snooping so I can use them for a 2nd VSAN cluster (in a different VLAN).
At the moment I have not set up any VLANs so the current cluster uses the native VLAN 1.
What are the proper steps that I have to do in order to enable IGMP with the minimum downtime?
Thanks
0 events found
No Events found!
JohnTsitsiklis
12 Posts
0
January 12th, 2016 07:00
Hi Daniel,
Thanks for the reply.
Do you know if this affects the default VLAN?
Thanks
JohnTsitsiklis
12 Posts
0
January 13th, 2016 08:00
No worries, it was my mistake.
Since I will have 2 vlans (92 & 93) for my servers, I guess the native VLAN 1 it does matter if it will have IGMP snooping enabled or disabled, because there will be nothing connected to it.
The switch ports will also be assigned to the 2 VLANs we will use
Thanks for your time