Unsolved
This post is more than 5 years old
58 Posts
0
23308
MXL 10/40
ho all,
please i need an advice of below scenario.
i have M1000 blade server and with 6 fabrics (4 mxl 10/40 in fabric A1 A2 B1 B2 for lan traffic connected to core switches and 2 brocade 6505 in fabric C1 C2 connected to storage)
what is the best config for this scenario?
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
November 30th, 2015 12:00
The getting started guides for each switch will help with the initial configuration. And the user guides can help with configuring the additional features you want the switches to perform.
MXL
http://dell.to/1MZPRcC
http://dell.to/1Or6mD3
6505
http://dell.to/1OAnILS
http://dell.to/1QQ6YUk
Dell TechCenter has a collection of white papers that can help you get things configured.
http://dell.to/1cxlYEX
Let us know if you have any questions.
Tqadi
58 Posts
0
July 15th, 2018 02:00
hi Daniel,
now i have the MXL is connected down to servers. two servers are Hyper-V servers clustered and the interfaces that connected to is 0/16 is hybrid mode untagged vlan 10 which is the VM's vlan server farm.
the uplink is tagged for all vlans facing the core switch. Nexus.
now i want to create a VM on servers and give it an IP in vlan 1 native vlan which is by default on server but there is no connection to core from this vlan.? how i want this port 0/16 to facing servers to send the vlan 10 traffic and vlan 1 traffic? dose this need any config on the hyper-V server V-switch. or the uplink facing the nexus??
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
July 18th, 2018 05:00
In order for the interface to pass tagged and untagged traffic, the server facing interface will need to be placed in hybrid mode.
Here is a KB article on how to do this: https://dell.to/2j49OJQ