N1500 VLAN Routing

Question

LOL I've got an N1548, with a couple VLANs. VLAN 1 (10.10.10.0) and VLAN 9 (192.168.9.0).  Computer connected to VLAN 1 with an IP of 10.10.10.50. Another connected to VLAN 9, 192.168.9.50. And I can't ping between them. I did go into Switching, VLAN and bind subnet to VLAN for both. Under Routing, IP, Config, Routing Mode is enabled. And in Routing, IP, IP interface config, I have both VLANs set with 10.10.10.1 and 192.168.9.1 respectively.  They can each ping their respective VLAN interfaces, '9.50 can pint '9.1 but not 10.1. The computer 10.50 can pine 10.1 but not 9.1.  I missing a link somewhere, any help would be greatly appreciated!

DELL-Josh Cr · Accepted Answer

Hi,

Since VLAN 1 is the default VLAN that may be the issue, try creating another vlan and see if that can route. Page 809 https://dl.dell.com/content/manual17678835-dell-emc-networking-n-series-switches-user-guide-version-6-7-0.pdf?language=en-us

Networking General

Was this post helpful?