Hello, we are already using dot1x and want to add management access by SSH to the switches based on RADIUS authentication. As you can see in the configuration below, I want to use a different RADIUS Server for the login authentication than for dot1x. I defined usages in the radius-server settings, but for some weird reason the switch still connect to 10.0.1.1 instead of 10.0.2.1. What am I missing here? aaa authentication login 'networkList' local lineaaa authentication login 'rad' radius localauthentication enabledot1x system-auth-controlaaa authentication dot1x default radius radius-server host auth 10.0.1.1name 'DOT1X_RADIUS'usage 802.1xkey 'KEYKEYKEYKEY'exitradius-server host auth 10.0.2.1name 'ADMIN_LOGIN_RADIUS'usage loginkey 'KEYKEYKEYKEY'exit line consoleexec-timeout 480login authentication networkListpassword PASSWORD exitline sshexec-timeout 480login authentication radexit Best regards

‎[N20XX] RADIUS Server usage login does not work

Posts

Selected Posts

BenjiShi

6 Posts

0

April 14th, 2022 00:00

I have opened a support case regarding the problem - seeing this is a known issue I hope it will get somehow fixed soon.

Benjamin

Dell Support Resources

View All

No Events found!

Top