Unsolved
9 Posts
0
3127
Not getting vlan DHCP
I have a Dell 5524 I'm trying to set up with multiple vlans. I have vlan 200-400 both on the router and switch. Port 24 is set to tagged (trunk) and it goes to a tagged port on my router, same vlan ID's are on both devices.
I have the PVID set to the Vlan ID, and on the trunk port, have the PVID set to 1. But I'm not getting a DHCP address across the trunk.
What am I missing??
SteveG144
9 Posts
0
March 15th, 2019 10:00
I switched the port going from the switch (that was in trunk mode) going to the tagged port on the router, to general mode.
Still getting a 169.x.x.x address
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
March 15th, 2019 10:00
Hi,
Try setting the port to general mode instead of trunk mode.
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
March 15th, 2019 11:00
What is getting the 169 address? Set a static ip and see what it can ping.
SteveG144
9 Posts
0
March 15th, 2019 11:00
When I set up the device, I assigned a IP to it so I can connect via web interface. Now that its set up and working, how can I have the switch get a IP from a specific VLAN DHCP range, that I will mark as reserved in the router?
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
March 15th, 2019 12:00
Page 207 talks about dhcp https://downloads.dell.com/manuals/common/powerconnect-5500-series_ug_en-us.pdf