PC55xx disable stacking mode

Question

Is it possible to disable stacking mode on the pc55xx switches ?On the pc34xx switches you can disable stack mode using the button on the device during boot) I tried going to the startup/boot menu and then the stack menu : [1]  Show unit stack id[2]  Set unit stack id[3]  Back 1 shows : Current working mode is stacking. Unit stack id set to 1. 2 gives me the option to change between 0-8 : Enter unit stack id [0-8]: Any hints how to disable the stack mode ?I don't want to see interfaces on units 2-8 when i don't have a stack : pc5548p# show vlan Vlan     Name        Tagged Ports      UnTagged Ports     Type    Authorization ---- ------------ ------------------ ------------------ --------- -------------  1        1                          gi1/0/1-48,         Default    Required                                         te1/0/1-2,                                                                      gi2/0/1-48,                                                                     te2/0/1-2,                                                                      gi3/0/1-48,                                                                     te3/0/1-2,                                                                      gi4/0/1-48,                                                                     te4/0/1-2,                                                                      gi5/0/1-48,                                                                     te5/0/1-2,                                                                      gi6/0/1-48,                                                                     te6/0/1-2,                                                                      gi7/0/1-48,                                                                     te7/0/1-2,                                                                      gi8/0/1-48,                                                                     te8/0/1-2,Po1-32

Stephan-thevalley · Answer

Daniel, Not sure if you are replying on my question ? We are already running the latest version. (4.1.0.8) Stephan

Stephan-thevalley · Answer

Daniel, Thanks for the answer. 'show interfaces description' and 'show interfaces advertise' show al ports, while 'show interfaces status' shows only the ports which are in the switch. Stephan

Networking General

Was this post helpful?