Unsolved
This post is more than 5 years old
6 Operator
•
1.8K Posts
0
619
October 31st, 2019 19:00
Power connect 7048p displays 01
Looked all over, is there any documentation as to the numbers displayed on the switches. Upgraded to newest firmware on one, now I am getting a 01 instead of 00 on the booted switch.
Thanks
No Events found!
DELL-Josh Cr
Community Manager
•
9.6K Posts
•
42.7K Points
0
November 1st, 2019 08:00
Hi,
It is the stack id. 1 is fine. Page 11 https://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_powerconnect/powerconnect-7048p_setup%20guide_en-us.pdf
pcmeiners
6 Operator
•
1.8K Posts
0
November 6th, 2019 13:00
Thanks for the reply, was late at night and I did not see the small print below the display, thanks for dispelling my fear of something being wrong.