Unsolved
This post is more than 5 years old
1 Message
0
71059
December 14th, 2011 08:00
PowerConnect 2824 management vlan
When in "managed" mode, can I apply the devices ip address to a vlan other than the default vlan1? Example: We use vlan 50 for management on our network. I typically apply the devices ip address to that vlan and use a specific server to manage all devices on this vlan. There does not seem to be the option for this on the 28XX series Dell PowerConnect switches.
Jcarleva57
1 Message
0
February 12th, 2012 05:00
Trying to do the same thing... did you find an answer to this???
Thanks.
Jim
Daniel My
10 Elder
•
6.2K Posts
0
February 13th, 2012 15:00
Hello
This question was answered on another thread:
http://en.community.dell.com/techcenter/networking/f/4454/t/19436531.aspx
No, the 28xx does not have the functionality to allow the IP to be assigned to specific VLANs. It assigns to VLAN 1.
Thanks
halext
1 Message
0
February 23rd, 2013 11:00
Hi,
Can i change the management vlan to another ?
best regards,
halext
qazi.mran
3 Posts
0
March 4th, 2013 02:00
How to create Link Aggregation, How link aggregation Works on Dell 2808 Switch,
On which ports Up-Link to be given.
How to create and setup DHCP Server on 2808 switch & How clients are connected to it.