PowerConnect 6248 show cpu utilization

Question

This command works in our 3448's and 5234's, so why doesn't it work in the 6248?  Is there an equivalent command that I'm not finding?  I'd like to know what kind of cpu load the switch is under so that I can add more vlans without worrying about the load.   Regards, Viralbyte

Crzywolf · Answer

Hearing it from the grapevine, the 2.x firmware version that is coming will include cpu and memory utilization.  As of right now, it is not in there.

stormytoad · Answer

Firmware 2.0.0.12 does have this feature. Here is a dump from one of my stacks:

#show process cpu

Memory Utilization Report

Status Bytes
------ ----------
Free 26965456
Alloc 169197312

Task Utilization Report

Task                    Utilization
----------------------- -----------
osapiTimer                    1.20%
bcmL2X.0                      0.75%
bcmCNTR.0                     0.25%
bcmLINK.0                     0.45%
bcmRX                         0.30%
bcmNHOP                       0.05%
MAC Send Task                 0.15%
RMONTask                      0.05%
dot1s_timer_task              0.15%
ipMapForwardingTask           0.15%
tL7Timer0                     0.05%
Kernel/Interrupt/Idle        96.45%

Total 100.00%

GYMCORE#show ver

Image Descriptions

image1 : default image
image2 :

Images currently available on Flash

--------------------------------------------------------------------
unit image1 image2 current-active next-active
--------------------------------------------------------------------

1 2.0.0.12 1.0.4.3 image1 image1
2 2.0.0.12 1.0.4.3 image1 image1

#

Networking General

PowerConnect 6248 show cpu utilization

Was this post helpful?