Moderator

 • 

7.8K Posts

May 7th, 2020 16:00

Hello luke94,

Have you rebooted the switch since you changed vlans?

Please let us know if you have any other questions.

Moderator

 • 

9.5K Posts

May 8th, 2020 09:00

Which port is connected from the server to the switch and how is that port configured?

Moderator

 • 

9.5K Posts

May 8th, 2020 13:00

Is it tagged on 1/g1?

Moderator

 • 

9.5K Posts

May 8th, 2020 13:00

You may need to have the VLANs tagged, with all of the VLANs untagged it may not know where to send the traffic.

12 Posts

May 8th, 2020 13:00

Hi Josh,

Port 1/g25 ist connected to the server.

console#show interfaces switchport ethernet 1/g25

Port: 1/g25
VLAN Membership mode:General Mode

Operating parameters:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: Admit All
Default Priority: 0
GVRP status:Disabled
Protected:Disabled

Port 1/g25 is member in:

VLAN Name Egress rule Type
---- --------------------------------- ----------- --------
1 Default Untagged Default
27 vm02-port27 Untagged Static

And port 1/g1 is connected to the uplink.

console#show interfaces switchport ethernet 1/g1

Port: 1/g1
VLAN Membership mode:General Mode

Operating parameters:
PVID: 1
Ingress Filtering: Enabled
Acceptable Frame Type: Admit All
Default Priority: 0
GVRP status:Disabled
Protected:Disabled

Port 1/g1 is member in:

VLAN    Name                              Egress rule   Type
----    --------------------------------- -----------   --------
1       Default                           Untagged      Default
27      vm02-port27                       Untagged      Static
100     management                        Untagged      Static

Regards,

 

12 Posts

May 8th, 2020 13:00

Now I have set tagged vlan 1 on port 1/g25. But the issue is the same. I can ping from the server (vlan 27) with the ip 10.10.27.2 to vlan 1 116.202.x.x, but I cant ping the gateway/internet.

 

No Events found!

Top