This post is more than 5 years old
4 Posts
0
43515
PowerConnection 6248 time/clock problem?
Hi all,
I find the setting from Dell™ PowerConnect™ 6200 Series Series System User’s Guide-->Configuring SNTP Settings.
I have no idea to update the clock.
I config ntp client setting in PowerConnection 6428 to Windows server 2008 r2.
My config:
Dell6248#show switch
Management Standby Preconfig Plugged-in Switch Code
SW Status Status Model ID Model ID Status Version
--- ---------- --------- ------------- ------------- ------------- -----------
1 Mgmt Sw PCT6248 PCT6248 OK 3.3.5.5
Dell6248#show clock
14:29:37 HKT(UTC+8:00) May 14 2005
No time source
Dell6248#show sntp configuration
Polling interval: 64 seconds
MD5 Authentication keys:
Authentication is not required for synchronization.
Trusted keys:
No trusted keys.
Unicast clients: Disable
Unicast servers:
Server Key Polling Priority
--------- ----------- ----------- ----------
a.b.c.d Disabled Enabled 1
Dell6248#show sntp status
Client Mode: Disabled
Last Update Time: JAN 01 00:00:00 1970
Unicast servers:
Server Status Last response
--------------- ---------------------- --------------------------
10.61.208.20 Other 00:00:00 Jan 1 1970
Is it correct configuration?
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
January 14th, 2014 06:00
Might try enabling sntp unicast.
console(config)# sntp unicast client enable
Is the SNTP server in a VLAN other than the default VLAN1? are other clients able to receive time from the SNTP server just fine? Have you tried using a public SNTP server to see if behavior changes?
louyeung
4 Posts
0
January 14th, 2014 16:00
Hi Dell-Daniel C:
You help me solve the clock problem. I am so thanks for your help. :emotion-2:
Lou Yeung