Unsolved
This post is more than 5 years old
2 Posts
0
1903
Powerconnect 6248 , fried ?
I tried to upgrade the firmware of my PC6248 to the latest release , followed the procedure and after runing the update bootcode command and restarted it....it never came back , now the master, power and fan leds are solid and cannot get anything on the console....does this means it is in a unrecoverable states or is there something I can do to bring it back to life ?
DELL-Willy M
802 Posts
1
March 20th, 2012 11:00
If you reboot the switch again do you get any response from the console at all? Are there any boot code errors or messages?
If you get a response from the console I would advise updating thru Xmodem. There is something information on the process on page 94 and 100 of the User Guide.
support.dell.com/.../ucg_en.pdf
DELL-Willy M
802 Posts
1
March 20th, 2012 12:00
If you have a warranty on the switch you can call in for support at 1-800-945-3355.
Other than trying a different power source there is not much you can do without any console access.
Afuentes
2 Posts
0
March 20th, 2012 12:00
Nothing comes on the the console , no indications of boot process...no messages. tried with tera term also and cannot get anything.