Networking General

2 Bronze
2 Bronze
50827

Quality of Service configuration in PowerConnect

I am trying to shape rate 300Mbps for 1Gbps port. In order to configure that I need to have below settings.

Committed Information Rate (CIR) (KBits/Sec)
Committed Burst Size (CBS) (Bytes)

 
If the burst size is configured at 600 ms with the bandwidth limit configured at 300 Mbps ie 

300 Mbps x 600 ms = around 21 Mbytes

Burst size is =22020096  Bytes  is it right?
what is CIR? as far I understood is average bandwidth. Is it 600Mbps on 1gbps port. Could you please let me know what should be the CIR setting.

Thanks
Replies (11)
4 Tellurium
3407

You are correct in the WebGUI it is asking for KBps

=400 Mbps [Megabit-per-second]

=400000 Kbps [Kilobit-per-second]

=50 MB/sec [Megabyte-per-second]

=50000 KB/sec [Kilobyte-per-second]

Ingress Rate Limit — Number of bits per second that can be received

from the ingress interface. Excess bandwidth above this limit is discarded.

Get Support on Twitter @DellCaresPro

Download the Dell Quick Resource Locator app today to access PowerEdge support content on your mobile device! (iOS, Android, Windows)

2 Bronze
2 Bronze
518

DELL-Willy M Thank you. It worked like charm. During this weekend I will get more traffic from my clients so that I will get actual results.

Latest Solutions
Top Contributor