3 Posts
0
790
S3148-10GE-2X10BaseT - 2-port 10GE 10BASE-T (XL) problems
I have multiple of these modules and can only get one (out of 5!) to work. Here is the interface config i am using
no ip address
switchport
no shutdown
If i plug any of the other four modules in the the same bay, they will not get a link light. The will show online in show sytem
-- Module 1 --
Status : online
Module Type : S3148-10GE-2X10BaseT - 2-port 10GE 10BASE-T (XL)
Num Ports : 2
Hot Pluggable : yes
but no config will bring up a link light. I have set speeds to all available and negotion to all available. Surely i did not get 4 bad modules? Is there anything else i can do to troubleshoot?
Kahanlo
3 Posts
0
October 8th, 2019 06:00
the switches all came with 9.14.2.2 and after a downgrade to 9.14.1.5 the uplink modules all get a link now
DELL-Josh Cr
Moderator
Moderator
•
8.7K Posts
0
October 4th, 2019 11:00
Hi,
Are you rebooting after trying different modules? Have you tried them in multiple switches?
Kahanlo
3 Posts
0
October 8th, 2019 05:00
yes, multiple reboots, 7 different switches