Reynaldo Suwandi,

Just to confirm, were you following the steps to install OS10 as seen on page 8 and 9 here? 

Let me know. 

Hi Chris,

thanks for response,

i do following the step from OS10 Enterprise Edition User Guide Release 10.4.0E(R3) 
page 22 - 24

and this what im doing :
1. first step im start with login into boot onie on ONIE : Install OS, start the step from here for install OS manually using USB drive.
2. figure out following  from OS10 Enterprise Edition User Guide Release 10.4.0E(R3) 
page 22 - 24
3. so after that i do uninstall OS and after this proses everything running good
4. on screen boot onie, i take step for select menu ONIE : Rescue for installation OS10 manually via USB drive
5. after inside the menu then nothing happen just stuck on screen with details info : status mode, version, build date

Do you have the bin on USB?

Try the steps found here and see if that works for you. 

Let me know.

Hi chris,

i already have bin and usb and put in into switch port usb.

anyway for the tutorial its not work,
on s4128f when i restart my switch, no instruction autoboot for press esc.

even i press di esc is showing into menu 

ONIE : Install OS
ONIE : uninstall OS
ONIE : Rescue Mode
ONIE : EMBED ONIE

ONIE : EDE-DIAG

when i press install os, or rescue mode or embed onie thats no response progress, and just show information like the this and stuck

ONIE: OS Install Mode ...
Version : 3.33.1.1-6
Build Date: 2017-10-19T10:30-0700

Hi, at this point, would you try one more time with another USB or with ones with smaller storage capacity?