SNMP configuration on Dell force10 switch s4810

I have configured snmp configuration in dell force10 s4810 switch but i guess it is not working properly.

Below is the configuration. please let me know what changes should i make to achieve the proper results.

snmp-server community public rw
snmp-server enable traps bgp
snmp-server enable traps snmp authentication coldstart linkdown linkup
snmp-server enable traps vrrp
snmp-server enable traps lacp
snmp-server enable traps entity
snmp-server enable traps stack
snmp-server enable traps stp
snmp-server enable traps ecfm
snmp-server enable traps vlt
snmp-server enable traps fips
snmp-server enable traps ets
snmp-server enable traps xstp
snmp-server enable traps ***
snmp-server enable traps config
snmp-server enable traps pfc
snmp-server enable traps envmon cam-utilization fan supply temperature
snmp-server enable traps ecmp
snmp-server group default_group 3 priv read read_all access VTY_Allow
snmp-server host 10.10.X.X traps version 3 priv MDC udp-port 162
snmp-server location mdcnoc@esds.co.in
snmp-server user MDC default_group 3 encrypted auth sha 6e90d626e7d38183f4da7c5b074206fc9e78e2b6 priv aes128 6e90d626e7d38183f4da7c5b074206fc9e78e2b6 access VTY_Allow
snmp-server view read_all 1.3.6.1.2.1.1.5.0 included
!
snmp ifmib ifalias long

Is there anything else I am missing other than this?

Regards,

Mukesh Gupta