Some Help With Setup of SNMPv3

I am unsure if the view is setup correctly, should it be internet, system or OID?  If OID where can I find the correct OID to enter so everything possible will be available when polled?

 

#show run

snmp-server engineid local ################
snmp-server view "view1" system included
snmp-server view "view2" internet included
snmp-server group "snmpgroup" v3 priv read "view2"
snmp-server group "snmpgroup2" v3 priv read "view1"
snmp-server user "user" snmpgroup2 auth-sha-key 9ad7fca5b78c8e327f1b9f489322c42e09fdca57
snmp-server v3-host #.#.#.# "user1" traps priv udpport #

#show snmp views

Name OID Tree Type
------------------------------ ------------------------------ ----------
Default iso Included
Default usmUser Excluded
Default snmpVacmMIB Excluded
DefaultSuper iso Included
view1 system Included
view2 internet Included

#show snmp group

Name Context Security Views
Prefix Model Level Read Write Notify
--------------------- ---------- ----- ------------- -------- -------- --------
DefaultRead "" V1 NoAuth-NoPriv Default "" Default
DefaultRead "" V2 NoAuth-NoPriv Default "" Default
DefaultRead "" V3 NoAuth-NoPriv Default "" Default
DefaultRead "" V3 Auth-NoPriv Default "" Default
DefaultRead "" V3 Auth-Priv Default "" Default
DefaultSuper "" V1 NoAuth-NoPriv DefaultS DefaultS DefaultS
uper uper uper
DefaultSuper "" V2 NoAuth-NoPriv DefaultS DefaultS DefaultS
uper uper uper
DefaultSuper "" V3 NoAuth-NoPriv DefaultS DefaultS DefaultS
uper uper uper
DefaultWrite "" V1 NoAuth-NoPriv Default Default Default
DefaultWrite "" V2 NoAuth-NoPriv Default Default Default
DefaultWrite "" V3 NoAuth-NoPriv Default Default Default
DefaultWrite "" V3 Auth-NoPriv Default Default Default
DefaultWrite "" V3 Auth-Priv Default Default Default
snmpgroup "" V3 Auth-Priv view2 "" ""
snmpgroup2 "" V3 Auth-Priv view1 "" ""

#show snmp user

Name Group Name Auth Priv
Meth Meth Remote Engine ID
----------------- ------------------ ---- ------ -------------------------
user snmpgroup2 SHA        ########

#show snmp

Community-String Community-Access View Name IP Address IP Mask
-------------------- ---------------- ---------------- ---------------- ----------------

Community-String Group Name IP Address IP Mask
-------------------- ------------------------------ ---------------- ----------------

Traps are enabled.
Authentication trap is enabled.

Version 1,2 notifications
Target Address Type Community Version UDP Filter TO Retries
Port name Sec
---------------- ------- -------------------- ------- ------ -------- --- ------

Version 3 notifications
Target Address Type Username Security UDP Filter TO Retries
Level Port name Sec
---------------- ------- ------------------ -------- ------ -------- --- -------
#.#.#.#  Trap User Auth-Pri Port 15 3

Source Interface:
SNMP trap Client Source Interface.............. Default