This post is more than 5 years old
5 Posts
0
22716
Stack PC 6224P and 6248
I just want to be sure that there are no issues stacking the 6224P with the non-PoE 6248. I'd also appreciate knowing what module(s) I'd need to add to my order to connect these two switches.
Thanks.
DELL-Willy M
802 Posts
0
February 27th, 2012 09:00
Should not be any problem stacking the PoE and Non- PoE 62xx switches.
There is a stacking kit you can purchase:
Each PowerConnect 62xx series switch stacking module kit will includes:
•One stacking module card
•One three meter stacking module cable
console>enable
console#show switch
Management Standby Preconfig Plugged-in Switch Code
SW Status Status Model ID Model ID Status Version
--- ---------- --------- ------------- ------------- ------------- -----------
1 Mgmt Sw PCT6224 PCT6224 OK 2.2.0.3
2 Stack Mbr Oper Stby PCT6224P PCT6224P OK 2.2.0.3
3 Stack Mbr PCT6224 PCT6224 OK 2.2.0.3 console#
DELL-Willy M
802 Posts
1
February 27th, 2012 10:00
Dell Part# 320-5171
search.dell.com/results.aspx
Lostboy411
5 Posts
0
February 27th, 2012 10:00
Thanks for the prompt and very detailed response. I'll get this equipment ordered - with confidence now. :emotion-1: