TACACS+ Web user access level

Question

Hi. I am deploy TACACS+ on my network. The access by Telnet is work well, but when the TACACS+ user access the switch web interface receve the mensage: 'Please note that you are a level 1 user and do not have configuration privileges. This session is limited to read-only operations.' How can I permit that TACACS+ user have high privillege?

DELL-Josh Cr · Answer

Hi, Which model switch is it?

RaphaelOliveira · Answer

Hi, Josh. The model is N2024P and N3024. I did the tests just on Dell N2024P, I don't know if the model N3024 will show the same probleme.

DELL-Josh Cr · Answer

You need to add it to that access line Page 256 https://dell.to/2USOk5g

RaphaelOliveira · Answer

Hi.Please, see the images below:

DELL-Josh Cr · Answer

Try adding it to https

DELL-Josh Cr · Answer

It works for SSH right?

RaphaelOliveira · Answer

I tried https too. But not solve.

RaphaelOliveira · Answer

Hi.

Today we work with Telnet, HTTP and HTTPS.

My problem is the web access, becouse the costumer don't have experience with CLI mode. So I nedd that TACACS+ user when to access by Web mode have the high privillege.

DELL-Josh Cr · Answer

Try setting a custom admin profile, page 312 https://dell.to/2Z0CgQO

Networking General

Was this post helpful?