
UNSOLVED
J
judahnator
2 Posts
0
617
August 9th, 2022 16:00
Trunk PowerConnect to Force10 Switch
I managed to stump myself with some networking. Long story short I am trying to trunk all VLANs from one switch to another, but cannot seem to make it work. One switch is a Dell PowerConnect, the other is a Dell Force10. Same vendor different model, so it should work.
I can see that the connection is active, line state is up, VLANs report they are active, the cable has been tested, but I cant seem to ping from one switch to the other. Any pointers? Steps I missed?
Interfaces:
console# show interfaces configuration ethernet g23
Flow Admin Back Mdix
Port Type Duplex Speed Neg control State Pressure Mode
-------- ------------ ------ ----- -------- ------- ----- -------- ----
g23 1G-Combo-C Full 1000 Enabled Off Up Disabled Auto
and
Force10#show running-config interface gigabitethernet 0/43 ! interface GigabitEthernet 0/43 no ip address switchport vlan-stack trunk no shutdown
Switchport:
console# show interfaces switchport ethernet g23 Port : g23 Port Mode: Trunk Gvrp Status: disabled Ingress Filtering: true Acceptable Frame Type: admitAll Ingress UnTagged VLAN ( NATIVE ): 1 Protected: Disabled Port is member in: Vlan Name Egress rule Port Membership Type ---- -------------------------------- ----------- -------------------- 1 1 Untagged System 10 client private Tagged Static 20 server private Tagged Static
and
Force10#show interfaces switchport gigabitethernet 0/43
Codes: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Trunk, H - VSN tagged
Name: GigabitEthernet 0/43
802.1QTagged: True
Vlan membership:
Q Vlans
M 10,20,
VLANs:
console# show ip interface vlan 20
Gateway IP Address Activity status Type
----------------------- ----------------------- --------
IP Address Type
----------------------- ---------
10.0.0.2/16 Static
and
Force10# show running-config interface vlan 20 ! interface Vlan 20 description Server Private ip address 10.0.0.9/16 vlan-stack compatible member GigabitEthernet 0/43 no shutdown
Responses (0)
Solutions (0)
