Unsolved
1 Rookie
•
25 Posts
0
1910
June 22nd, 2021 05:00
VLAN error with Dell Powerconnect 28xx
pfSense: 2.5.1 x64
Switch: Dell Powerconnect 2824 and 2848
I configured my 1st pfsense, DNS, DHCP vlan1, squid are working ok.
I'm trying to create vlans but I can't get them to work, I don't know what else I can do to make them work.
I saw this video https://www.youtube.com/watch?v=l3GNKKt9WMc, but I couldn't get it to work.
Switch has a LAG on ports 21-24 and 45-48.
I tried factory reset(serial port) unsuccessfully.
VLANS Config on pfSense:
VLAN 1: 192.168.0.0/24
VLAN 200: 192.168.20.0/24
VLAN\VLAN Membership config:
VLAN 1 default config
VLAN 200:
Port 1 Tagged pfSense
Ports 13-14 Untaggeg Windows
If I set VLAN(200) on VLAN\port settings, the client computer does not get the IP (192.168.20.0/24) via DHCP (static IP doesn't work to, I tried ping between PCs)
If I leave it on vlan 1, it gets the IP of the range 192.168.0.0.
What am I doing wrong?
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.2K Points
0
June 22nd, 2021 11:00
Hi,
Is pfSense DHCP configured to hand out DHCP addresses on both subnets for each VLAN? Is the tagged port tagged on both VLANs?
RafMass
1 Rookie
•
25 Posts
0
June 22nd, 2021 12:00
On VLAN 1 operation is normal (PING, navigation, etc.)
In VLAN 200 it is as if each PC was disconnected, even setting the fixed IP does not work.
RafMass
1 Rookie
•
25 Posts
0
June 22nd, 2021 12:00
Yes , I created 2 DHCPD config
VLAN 1: 192.168.0.0/24
VLAN 200: 192.168.20.0/24
I tested post the images here , but I don't know which sites are allowed.
https://forum.netgate.com/topic/164404/vlan-error-with-dell-powerconnect-28xx/8
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.2K Points
0
June 22nd, 2021 12:00
Those ports get IP addresses and are able to ping when they are on VLAN 1 but not VLAN 200?
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.2K Points
0
June 22nd, 2021 14:00
Can you disconnect the pfsense system, just to rule out the issue is coming from there. Also try turning off ingress filtering.
RafMass
1 Rookie
•
25 Posts
0
June 23rd, 2021 07:00
Hi!
I didn't quite understand your message.
I tested it connecting to a simple adsl modem on port 1, it didn't work (PC on port 13-14)
If I connect on other port( no VLAN) works.
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.2K Points
0
June 23rd, 2021 08:00
I want to rule out pfsense as the problem. Connect a device to port 13 and to port 14, preferably two computers, then disconnect everything else from the switch, give those computers static IPs on the VLAN 200 subnet.
RafMass
1 Rookie
•
25 Posts
0
June 23rd, 2021 11:00
I did the test, and the ping is done successfully between ports 13-14 VLAN 200
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.2K Points
0
June 23rd, 2021 12:00
That’s good, now reconnect the pfsense system and see if you can still ping.
RafMass
1 Rookie
•
25 Posts
0
June 24th, 2021 09:00
Still doesn't work
VLAN configs
pfSense DHCP servers config
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.2K Points
0
June 24th, 2021 10:00
Since it was able to ping with static IPs and no pfSense, did that ping stop working or does it still work and only DHCP doesn’t work?
RafMass
1 Rookie
•
25 Posts
0
June 24th, 2021 12:00
My goal is for the VLANs to be able to access the Internet and internal servers, but not communicate with each other
RafMass
1 Rookie
•
25 Posts
0
June 24th, 2021 12:00
with static ip the ping works.
I can't receive IP via DHCP, or ping the server on port 1
How can I configure the VLANS so they can access the Internet and the company's internal servers?
DELL-Josh Cr
Moderator
•
9.6K Posts
•
42.2K Points
0
June 24th, 2021 14:00
Is port 1 tagged for both vlan 200 and vlan 1?
RafMass
1 Rookie
•
25 Posts
0
June 25th, 2021 05:00
This switch model does not allow changes to VLAN1