Hi,

It looks like part number N243X. All of the 1U switches should work with this.

Nope, wrong rails. I mentioned it does not use ReadyRails. Have a look at any of the 3 links in my post.

Dell S5000 is different from most Dell switches.

The other part I found was PD4W5

ASSY,BRKT,REAR,MET,4PST,S-SRSD.

But I don’t have an image of it to see if it matches those links.

Thanks Josh, seems like these are the right ones.
I can't find it online from the usual places, which Dell dept should I attempt to contact?

Hi all,

I'm looking for the exact rail kit for the Dell Networking S5000 switch. I have photos of the original rails that came with the unit, but I cannot find them available anywhere online.

The rails consist of:
- Front mounting bracket (rack ear) with a 90° bend
- Long side support rails

The parts have the following stamped markings:
- Front bracket: S65-0151A-02 A, SAM SUZ
- Side rail: S65-0121-02 A, SAM SUZ

I've tried searching under Dell PN 3X8FW (listed as "PowerEdge Cloud 3U Rail Kit S5000") and 5RN1M (Type A5 ReadyRails), but neither matches the hardware I have.

Does anyone know the correct Dell part number for these specific rails, or where they can be purchased? Photos attached.

Thanks in advance for any help.

Hi,

The closest part available that similarly look like in the picture would be DPN# Y1PF8. Reference user guide: https://dl.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_networking/esuprt_net_fxd_prt_swtchs/force10-s5000_deployment%20guide_en-us.pdf