Unsolved
This post is more than 5 years old
1 Rookie
•
9 Posts
0
6081
November 3rd, 2005 16:00
powerconnect 6024 64bit byte counter
Please tell me the OID for the 64 bit byte counter of the interfaces. I poll the byte counter every 5 minutes and the 32 bit counter wraps within 5 minutes.
Thanks,
Joe
Thanks,
Joe
0 events found
No Events found!
DELL-Cuong N.
1K Posts
0
November 4th, 2005 15:00
Ok, unfortunately I know for sure those HC counters are not supported and I don't think there are any other equivalent 64 bit counters.
Cuong.
DELL-Cuong N.
1K Posts
0
November 4th, 2005 15:00
The 6024 doesn't support many of the 64 bits counters. I can't remember exactly which one were supported - I can do some research and get back to you but in general the 6024 doesn't support very many 64 bit counters. If you queried it and it didn't show up then likely it is not supported. BTW, which one specifically were you querying? There are some equivalent counters in the private section of the MIB so maybe I can find an equivalent.
Cuong.
jrizzo
1 Rookie
•
9 Posts
0
November 4th, 2005 15:00
.iso.org.dod.internet.mgmt.mib-2.interfaces.ifTable.ifEntry.ifInOctets / 1.3.6.1.2.1.2.2.1.10
.iso.org.dod.internet.mgmt.mib-2.interfaces.ifTable.ifEntry.ifOutOctets / 1.3.6.1.2.1.2.2.1.16
But I need the the counter64 equivalent. I believe it is called:
ifHCInOctets
ifHCOutOctets
Thanks for the assistance.
Joe Rizzo