Unsolved
This post is more than 5 years old
3 Posts
0
959
October 17th, 2018 12:00
vlans dissapear after adding interface to port-channel
Hi
Switch model is n3048
I have gigabit interface with two vlans. Switchport mode is trunk. After adding this interface to port-channel ( which has the same vlans configured ) vlans disappear from gigabit interface.
It worked on 6248 ( vlans was still presend on gigabit interface after adding that interface to port-channel ) and now its not working on n3048
Is it suppose to be like that or am I missing something
DELL-Josh Cr
Moderator
•
9.5K Posts
0
October 17th, 2018 13:00
Hi,
It should get the VLANs from the port channel config after it is added, so this sounds correct.
szuwaaar
3 Posts
0
October 17th, 2018 23:00
The difference is that when the port-channel is inactive the vlans are not present on slave gigabit interface. On old 6248 the vlans were still working on slave gigabit interface when port-channel was inactive.